MicronPC CM900 Betriebsanweisung PDF herunterladen (Seite 8)

OPERATING INSTRUCTIONS

The following sections provide information about operating and adjusting

your monitor.

General Instructions

To turn on the monitor, complete the following steps:

1 Check that the power cord is connected to the monitor and a power

socket.

2 Check that the video cable is connected to your computer’s video port.

3 Locate the power button (see Figure 4 on page 9).

4 Press the power button. The power indicator will light up. The monitor

features a unique quick-switch system, so a picture should appear within

seconds after the monitor is turned on.

Cleaning the Monitor

To keep the monitor looking new, periodically clean it with a soft cloth. As a

safety precaution, always unplug the monitor before cleaning it. Stubborn

stains on the monitor’s case can be removed using a damp, dust-free cloth

and a mild detergent solution.

Caution: Never use strong solvents, such as thinner, benzene, or

abrasive cleaners, because these will damage the monitor.

To clean the monitor screen, use window cleaner (alcohol/ammonia free)

and a damp, dust-free cloth; however, make sure the monitor has been

turned off first. Never apply the window cleaner directly to the monitor

screen. Always spray the cloth first; then wipe down the screen.

Front Panel Controls

The power button is located on the front panel of the monitor. The buttons to

the left of the power button are for adjusting the monitor’s picture. See

Figure 4 and Table 1 on page 9 for the layout and names of the control

buttons.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 18 19

Keine Kommentare

MicronPC CM900 Betriebsanweisung Seite 8